DRI Energy Recovery Ventilator (ERV)... Fresh Air solution from the Airgineers

DRI Energy Recovery Ventilators are equipped with EcoFresh Heat Recovery Wheels (HRW); capable of recovering more than upto 75% of each sensible and latent energy from the stale exhaust air and transferring it to the fresh outside air. The rotating wheel transfers the sensible and latent energy between the counter flowing exhaust and supply air and in the process preconditions (cool/ heat/ dehumidify/ humidify) the fresh air.

The EcoFresh rotor HRW is the first choice of OEMs in N.America, Japan and Europe.

The DRI ERV helps to meet ASHRAE 62 and other international standards specified ventilation rates without increasing the air conditioning tonnage, saving capital and operating costs considerably.

Available in five models, DRI ERVs address the basic requirements of a commercial energy recovery ventilator including -

• High energy transfer efficiency (both sensible and latent)
  (Making it the ideal choice in tropical regions as India)
• No cross contamination - Cross contamination between air streams limited to an absolute minimum with molecular sieve 3Å* (EcoSorb 300) coated energy recovery wheels.
• Economical first cost
• Low operating costs
• Low maintenance

FEATURE HIGHLIGHTS

• Incorporates High Performance Ecofresh Total Energy Recovery Wheel in Aluminium, coated with Molecular Sieve 3Å* for limiting cross contamination. • Efficient uptake of both sensible and latent energy each being more than 65%. • CNC fabricated cabinet type units in sheet steel construction. • Powder coated to world-class finish in siemens grey shade/off white leather finish. • Very low noise levels to meet advanced installation requirements. • Removable and washable Synthetic pre filters. • Large panel opening for easy access to filters and inspection of other components.

• Provided with factory set purge. • Casing insulated with 19 mm close cells high density insulation to prevent condensation of moisture on exteriors or interiors of the unit. • Provided with metalic collars for duct connection. • Compact models, easy to install, operate and maintain. • Feather touch brush seals minimize cross contamination & ensure long life. • DRI ERVs are certified.

SPECIFICATION - ERV - 850

SPECIFICATION - ERV - 1200/1700

* Currently not available in Canada & few other countries
** Measured at 3m distance (at 90°) when unit is ducted.

Note - Because of our policy of continuous product improvements, specifications are subject to change without notice.