| Yes, the heat wheel does all
three! The heat enthalpy wheel reduces the energy consumption and
energy costs of heating and cooling for a building, reduces the size
and capital cost of the buildings heating and cooling equipment and
provides fresh air ventilation to meet or exceed prescribed ventilation
code standards. Can building owners, designers and consultants afford
to ignore this product?
The wheels 'precondition' outdoor air delivered
to conventional HVAC systems. This increases their capacity and
efficiency. The wheel can be used for
preconditioning as part of a complete, system or as an individual
component to be duct mounted by the contractor.
The 100% Fresh Air Solution at Hospitals
Airconditioning systems for hospitals and nursing
homes are normally designed as 100% fresh air, once through systems,
to eliminate the risk of carryover of airborne infections and odour.
This places a lot of demand on first cost and operating costs. The
heat wheel is the ideal solution in such cases certain brand of
heat wheels have a desiccant coating with pore opening smaller than
3Å* (Ecosorb 300)* diameter, 5000
times smaller than the diameter of a human hair. These desiccants
act as a sieve and only allow water molecules to enter the pores
and let the other contaminants go off with the exhaust air.
This selective adsorption criteria is ideal for
hospital applications. The heat wheel makes healthy air affordable.
This means cost effective, healther indoor environment, and dramatically
reduced driller and boiler loads. The energy required to heat cool,
humidity or dehumidify outdoor air by as much as 90%. Adding a heat
wheel to a new hospital project designed in accordance with the ASHRAE
IAQ (Indoor Air Quality) standard reduces the operating cost of the
HVAC system to the extent that initial investment is paid back almost
immediately. |
HOME]
[ABOUT US] [LOCATIONS]
[PRODUCTS] [APPLICATIONS]
[NEWS] [R&D] [IAQ]
[CAREERS] [CONTACT US]
